What are the routine inspection of plunger pump Aldeanueva de Santa Cruz

Consultar con el anunciante
Fecha de publicación: Agosto 19, 2020
  • Ubicación: Aldeanueva de Santa Cruz, Ávila, Spain



1. Check the inner leakage of boom cylinder by plunger pump. The easiest way
to do this is to raise the boom and see if it has a significant level of
composure. If the drop is obvious, install the oil cylinder for inspection and
replace the seal ring if it is worn;


2. Check the control valve. First wash the safety valve, check whether the
valve core can wear, if wear should be replaced. If there is no change after the
installation of the relief valve, check the wear condition of the valve core of
the control valve again. The application limit of the clearance is 0.06mm, which
should be replaced if the wear is serious;


3. Measure the pressure of plunger pump. If the pressure is too low, the
dispatching is completed and the pressure cannot be adjusted, which shows that
the plunger pump is seriously worn.
Similarly, in general, the components of
the plunger pump boom with load can not be lifted by the following reasons:


Related products:


Vacuum
Brazing Machine For PCD Diamond Tools


Other related products:


Liquid
Ring Vacuum Pump

Share by email Share on Facebook Share on Twitter Share on Google+ Share on LinkedIn Pin on Pinterest

Contactar con el anunciante Compartir

Información útil

  • Evita fraudes actuando localmente o pagando con PayPal
  • No pagues nunca con Western Union, Moneygram u otros servicios de pago anónimos.
  • No compres ni vendas fuera de tu país. No aceptes cheques de fuera de tu país
  • Este sitio no está involucrado en las transacciones y no gestiona los pagos ni las entregas. No garantiza las transacciones, no provee servicios de depósito y no ofrece "protección al comprador" o "certificación del vendedor"